The sling can be easily attached to/detached from any firearm with QD slots using two QD PD (Quick Detach Push Button) swivels.
EFFICIENCY
VERSATILITY
AGILITY
The sling can be easily attached to/detached from any firearm with QD slots using two QD PD (Quick Detach Push Button) swivels.
The front sling swivel is on the adjustment strap.
The rear swivel slides freely along the main loop of the sling. The sling remains securely in place on your back without any shifting or sliding, so you can even wear it under a backpack or over a plate carrier.
Pull up the buckle tab and push the firearm forward. Lock it in the required position by releasing the tab.
To shorten the sling, pull the adjustment strap forward along the barrel with one hand, while lifting the firearm with the other.
Quick release buckle. Only use it if you need to take the sling off without pulling it off over your head.
Remove the comfort pad.
To increase the size, slide the rear buckle towards the release buckle.
Pull the release buckle and the single strap in the opposite directions to adjust.
Free up your hands.
Muzzle up
Muzzle down
Biathlon method
On the right shoulder
Release the adjustment strap to half its length, so that the buttstock fits your shoulder comfortably.
On the left shoulder
Fully extend the adjustment strap to shoot from the prone position or the weak shoulder. The sling will not restrict your movements.
The sling is worn over your head, securing the firearm to your body;
No risk of dropping your firearm;
The firearm weight is spread over the sling, so your arm muscles are relaxed;
You can change the position of your firearm with one quick motion;
No need to take the sling off your shoulder or perform any complicated manipulations.
The two-point configuration is most suitable for machine guns and pump-action shotguns. If necessary, use the universal sling loop with a QD slot (sold separately).
Set the maximum length.
Join the sling straps together.
Attach the comfort pad if necessary.
Set the maximum length.
Attach the comfort pad if necessary.
It allows you to attach the sling to firearms without a QD slot on the small of the buttstock.
This way you can fold the stock without twisting the sling. The swivel rotates freely in the slot, and the base remains on top, above the stock.
A compact QD sling swivel base for Weaver and Picatinny rails. It features a grooved anti-rotation interface, preventing the sling swivel from spinning. Steel.
A steel QD sling swivel base for the KeyMod interface. Its grooved anti-rotation design prevents the sling swivel from spinning.
© Copyright 2018 TDRgear - All rights reserved.